NVF2G-S General Purpose variable frequeny drive

1. Overview

NVF2G-S series is mainly used for variable frequency speed regulation, soft starting, improving operating accuracy, improving power factor, overcurrent, overvoltage, overload protection and other functions of AC asynchronous motors. At the same time, it also has the function of energy conservation and reducing equipment noise.

2.Applications

There are two main types of applicable loads:

1) Constant torque type and universal type.

2) Variable torque type.

3. Technical features

Rated working voltage (V): three-phase 380~440V: 380V(-15%)~440V(+15%)

Power range: 1.5KW~400KW

Output frequency range (Hz): 0Hz-400Hz

Control method: non PG vector control, V/F control

Starting torque: 150% rated torque at 0.5Hz

Overload capacity:

T type: 150% rated current for 1 minute, 180% rated current for 2 seconds;

F type: 120% rated current for 1 minute, 150% rated current for 2 seconds

Multi speed control: 16 speed control

Analog input: 1)AI1: (0-20)mA, (4-20)mA or (0-10)V, (-10~+10)V 2)calibration function

Simple PLC

4. Working conditions

Ambient temperature:  (-10~+45) ° C. When using between 45 ° C and 55 ° C, it’s necessary to consider derating. The capacity decreases

by 1% for every 1 ° C increase in temperature;

Relative humidity: (5-95)% R H;

Storage temperature: -25 ° C ~+55 ° C,

If the altitude is above 1000 meters, please reduce the rating by 1% for every 100m increase, but it cannot exceed 3000m;

Indoor use, places that are not exposed to direct sunlight, dust, corrosive gases, flammable gases, oil mist, water vapor, dripping water, or salt,

1. Overview

NVF2G-S series is mainly used for variable frequency speed regulation, soft starting, improving operating accuracy, improving power factor, overcurrent, overvoltage, overload protection and other functions of AC asynchronous motors. At the same time, it also has the function of energy conservation and reducing equipment noise.

2.Applications

There are two main types of applicable loads:

1) Constant torque type and universal type.

2) Variable torque type.

3. Technical features

Rated working voltage (V): three-phase 380~440V: 380V(-15%)~440V(+15%)

Power range: 1.5KW~400KW

Output frequency range (Hz): 0Hz-400Hz

Control method: non PG vector control, V/F control

Starting torque: 150% rated torque at 0.5Hz

Overload capacity:

T type: 150% rated current for 1 minute, 180% rated current for 2 seconds;

F type: 120% rated current for 1 minute, 150% rated current for 2 seconds

Multi speed control: 16 speed control

Analog input: 1)AI1: (0-20)mA, (4-20)mA or (0-10)V, (-10~+10)V 2)calibration function

Simple PLC

4. Working conditions

Ambient temperature:  (-10~+45) ° C. When using between 45 ° C and 55 ° C, it’s necessary to consider derating. The capacity decreases

by 1% for every 1 ° C increase in temperature;

Relative humidity: (5-95)% R H;

Storage temperature: -25 ° C ~+55 ° C,

If the altitude is above 1000 meters, please reduce the rating by 1% for every 100m increase, but it cannot exceed 3000m;

Indoor use, places that are not exposed to direct sunlight, dust, corrosive gases, flammable gases, oil mist, water vapor, dripping water, or salt,

CHINT VFD Accessory Selection Guide EN Revised.pdf857.41 KB
NVF2G-S catalogue.pdf1.72 MB
NVF2G-S user manual.pdf4.23 MB
NVF2G-S-11.pdf277.38 KB
NVF2G-S-15.pdf291.41 KB
NVF2G-S-220.pdf292.23 KB
NVF2G-S-400.pdf281.12 KB
NVF2G-S-45.pdf292.34 KB
NVF2G-S-315.pdf281.29 KB
NVF2G-S-75.pdf291.73 KB
NVF2G-S-22.pdf291.65 KB
  • Products
  • Solutions
    • Solar
      • Distributed PV
      • Off-grid PV
      • Solar Street Light
      • Commercial & Industrial PV Storage & Charging
      • Residential Photovoltaic Intelligent Charging & Storage
      • Solar Pump
  • Services
    • Customer Services
    • Enquiries
    • Download Center
  • About Us
    • Company
    • Blog
    • News Center
    • Events
    • Contact Us
    • Integrity and Compliance
    • Sustainability
  • Careers
Sunlight